Products
- Remote Control[5]
- Other Electrical Equipment[5]
- Other Switches[10]
- Wall Switches[2]
- Transformers[7]
- Ventilation Fans[10]
- Pressure Gauges[10]
- Temperature Instruments[10]
- Valves[10]
Contact Us
- Contact Person : Mr. Zou Leo
- Company Name : Liaoning Jinli Electric Power Electrical Appliance Co., Ltd.
- Tel : 86-415-6256999
- Fax : 86-415-6131000
- Address : Liaoning,Dandong,Tongxing Village, Tongxing Town, Zhen'an District
- Country/Region : China
- Zip : 118001
Products List
transformer oil indicator
1.Mounting:Top mounted
2.Electrical signal:non-electrical signal
3.Welded flange:User owned
4.oil indicator
1.Box-cover of the transformer:30+1mm.2.The transformer use pointer oil lever gauge with float ball drive,non-electrical signal.3.Install the oil level gauge by the...
transformer oil indicator
1.Mounting:Top mounted
2.Electrical signal:non-electrical signal
3.Welded flange:User owned
4.oil indicator
1.Box-cover of the transformer:30+1mm.2.The transformer use pointer oil lever gauge with float ball drive,non-electrical signal.3.Install the oil level gauge by the...
cooling blower
1.Cooling blower diameter of wheel 560
2.Total length of the blower 90
3.Capacity of transformer matched 100-200KVA
1.When the cooling blower is used for cooling the dry-type transformer, the blowers should be at both sides of the coil, the cold air is directly blowing into the...
On load electric control device
Part number: SYXZZ200/35-7, on load tap changer is a used for oil-immersed transformer electric control device.
Part number: SYXZZ200/35--7 just equals to S:three phase, Y: On load, X: Neutral point voltage regulation, Z: adopting resistance transit, Z: Direct change, 200A/ 35KV/...
on load tap changer
1. 63A/10KV/3pos/4 heads/3phase,
2. bar form tap changer for tansformer use
3. tao changer
1.This kind of switch applies to the single-phase,three-phase,combination oil-immersed transformer of electrical power .2.The frequency of 50HZ,60HZ,rated voltage of 10KV,35KV,rated...
release pressure valve
1.opening pressure: 25Kpa
2.Effective oil jetting ccaliber: 25mm
3.Mounting method: screw mounting
4.pressure valve
1.This series of pressure control valves applies to the pressure protection of the oil boxes of the products of oil-immersed transformer fully-seales...
on load tap changer
1.Load tap changer:200A
2. Rated voltage:35KV
3. 3 phase
4.tap changer
1.The uniformly designed load tap changer has got the advantages of structure adcanced,action reliable,service life long,maintain convenient etc,applying to the three phase oil immersed transformer of...
dry-type transformer temperature controller
1. three phase roving/top phase
2.output over temperature alarm
3.directly 6 one phase blowers
4.temperature controller
1.The temperature control instrument of JL-BWD3K130A dry-type transformer specially designed for the safe operation of the dry-type transformer.2.it adopts...
cooling blower
1.Cooling blower diameter of wheel 582
2.Total length of the blower 110
3.Capacity of transformer matched 400-630KVA
1.When the cooling blower is used for cooling the dry-type transformer, the blowers should be at both sides of the coil, the cold air is directly blowing into the...
on load tap changer
1.Load tap changer:200A
2. Rated voltage:35KV
3. 3 phase
4.tap changer
1.The uniformly designed load tap changer has got the advantages of structure adcanced,action reliable,service life long,maintain convenient etc,applying to the three phase oil immersed transformer of...